Currently, there are three types of wells in existence. The type of water well that one wants to make will determine the kind of service company or contractor they will hire. The three types of wells are dug wells, driven wells, and drilled wells. Some wells are more common in certain places than others. Dug wells for instance are most commonly found in less-developed countries or in rural areas. When one needs Water Well Drilling Fort Stockton Offers the perfect location to visit.
Dug wells are made because individuals lack enough funds to have service firms drill the wells. This is the reason they still exist in less developed areas. Also, drilling technology is not available in those regions because they are underdeveloped. This kind of well is also suitable in regions with shallow water-tables.
Dug wells used to be very common several years ago, but they are becoming less common each day as technology becomes more accessible. They are dug using hand shovel. The digger, digs a hole in the ground and continues digging until they access underground water. When this happens, they use buckets to draw water and pour it out of the hole. This process continues until the water becomes too much that it cannot be drawn.
These wells are difficult to dig past the water-table. There are chances the well may dry up during the reason thus they are not reliable. To avoid drying up one should dig the well during the dry season when the water table is low. The digging process has a number of challenges. In cases where the hole is dug too deep, cases of suffocation are common. Sometimes people get buried alive when the soil gets too loose and caves in.
Other kinds of wells commonly used presently are driven wells. They are still in application in numerous regions of the world even if they are not that common. When digging is done, a pipe of a small diameter is driven into soft soil such as gravel or sand. Other particles including sand enter the pipe and are removed with the use of a screen.
Driven wells cannot go very deep because the pipe cannot be driven in hard soil. The wells are usually very shallow as a result. The shallowness of the wells is one of their major disadvantages. The shallow well is usually susceptible to surface contaminants, which make the water not suitable for drinking or use in domestic applications.
Lastly, drilled wells are excavated using a drilling rig. The process is expensive, but the wells are durable and produce safer water free of contaminants. Drilling rigs used in this process are usually mounted on big trucks. Drilling rigs may have various kinds of bits attached to them for drilling. Some of the types of drill bits in use today include rotary drill bits, percussion bits, and auger bits.
For hard rock, rotary drill bits are designed to drill through such surfaces. Hard materials like diamond are used to make drill bits. Auger bits are designed for soft ground while percussion bits cut through rock by smashing. Drilled wells are usually very deep. The depth may extend more than 1000 feet. Pumps are used to pump water out of them for domestic use.
Dug wells are made because individuals lack enough funds to have service firms drill the wells. This is the reason they still exist in less developed areas. Also, drilling technology is not available in those regions because they are underdeveloped. This kind of well is also suitable in regions with shallow water-tables.
Dug wells used to be very common several years ago, but they are becoming less common each day as technology becomes more accessible. They are dug using hand shovel. The digger, digs a hole in the ground and continues digging until they access underground water. When this happens, they use buckets to draw water and pour it out of the hole. This process continues until the water becomes too much that it cannot be drawn.
These wells are difficult to dig past the water-table. There are chances the well may dry up during the reason thus they are not reliable. To avoid drying up one should dig the well during the dry season when the water table is low. The digging process has a number of challenges. In cases where the hole is dug too deep, cases of suffocation are common. Sometimes people get buried alive when the soil gets too loose and caves in.
Other kinds of wells commonly used presently are driven wells. They are still in application in numerous regions of the world even if they are not that common. When digging is done, a pipe of a small diameter is driven into soft soil such as gravel or sand. Other particles including sand enter the pipe and are removed with the use of a screen.
Driven wells cannot go very deep because the pipe cannot be driven in hard soil. The wells are usually very shallow as a result. The shallowness of the wells is one of their major disadvantages. The shallow well is usually susceptible to surface contaminants, which make the water not suitable for drinking or use in domestic applications.
Lastly, drilled wells are excavated using a drilling rig. The process is expensive, but the wells are durable and produce safer water free of contaminants. Drilling rigs used in this process are usually mounted on big trucks. Drilling rigs may have various kinds of bits attached to them for drilling. Some of the types of drill bits in use today include rotary drill bits, percussion bits, and auger bits.
For hard rock, rotary drill bits are designed to drill through such surfaces. Hard materials like diamond are used to make drill bits. Auger bits are designed for soft ground while percussion bits cut through rock by smashing. Drilled wells are usually very deep. The depth may extend more than 1000 feet. Pumps are used to pump water out of them for domestic use.
About the Author:
When you are searching for information about water well drilling Fort Stockton residents can come to our web pages today. More details are available at http://www.arrowheadwellservice.com now.
No comments:
Post a Comment